The Schley 11400 socket is specially made for working on Ford power stroke 6.7 diesel injectors, is a seventeen millimeter and has twelve points that will make it as easy as possible for you to install no matter what angle you need to take. This socket also has a depth stop to keep your socket at just the right height to get the job done right the first time. The thickness of this socket will cut way down on damage to the flare and flex nuts, and a nose geometry that was built to cut down on possible damage to electrical connections. This linear socket was created so you have the room to torque the necessary fittings without having to make complex equations while you are using torque adapters. With today's highpressure injection, the technician finds it is critically necessary to remove and replace the injector lines, applying the correct torque. This Ford specialty 17mm, 12 point socket and a deep crows foot will enable the mechanic to pull off a variety of injector lines and the one-of-a-kind design of the tool means you can remove the lines without breakage or damage to the electrical connections. You can spin the crows foot under the bent lines by hand and this long socket will allow you the clearance you need and the correct shape to torque the fuel lines the right way.